Sliding Load Tray/Bike Tray 1200mm Wide x 1500mm Deep suitable for 4 Bikes

£1,254.00

Note *All our bike trays are made to order and usually take 5 – 10 days.

We know that buying a stock size product doesn’t always fit your requirements so we make custom trays as standard !

 

Available on back-order

SKU: SLBT-1200-1500 Category: Tag:

Description

Note *All our bike trays are made to order and usually take 5 – 10 days.

We know that buying a stock size product doesn’t always fit your requirements so we make custom trays as standard !

The size depends on how many bikes you need to carry, what frame sizes you have and most importantly will the bike fit in the back of your vehicle with the front wheel off and the rear on. The correct positioning of the bikes on the tray is also key to allow the handle bars clearance of any obstructions, but you already know that 😉

The sliding trays we produce are constructed from an anodised aluminium extrusion which have slots for drop in sliding T nuts (M4, M5, M6 and M8) so adding mounting points is simple. The drawer runners we use are a heavy duty lockable runner that can take weights of up to 230kg (depending on size). To extend the tray from its stored position all you need do is depress the two red locking levers and pull, when fully extended the tray will lock automatically, to release do the same in reverse.

The main base and facias of the tray are constructed using 12mm Birch Ply that has been resin coated with a printed hex pattern, this stuff is waterproof, super strong and virtually impossible to scratch so will last for years.

We have also added two sides with bungee holes to secure loads down and a rear panel with Tyre cutouts, these can be removed at anytime by unscrewing the stainless button head screws.

At the front and rear of the tray there is a aluminium rail to allow for connecting some of the accessories we make, after all what good is a tray if you can’t mount your stead. Add one of our Fork mounts suitable for extrusion fitting with the correct fork mount and axle inserts and you have everything you need to mount your first stead.  There really easy to mount – The t-nuts (supplied with the Extrusion fitting Fork Mounts) just slip in from above so you don’t need to worry about taking the frame apart. Fork Mount/ Mounts just drop on, finger knobs located in the t-nuts and positioned/ re positioned before tightening.

If your mounting multiple bikes your probably going to need to add some offset mounting plates to the fork mounts, these give infinite positioning possibility’s which we guarantee are essential, after all there are so many different sizes of frame along with frame geometry.  Its like a game of ‘Tetris’ once you’ve mastered it, its easy 😉

When you need the tray for something else undo the finger knobs and remove the Fork Mounts leaving the tray clear of any obstructions.

*Don’t worry if you have already purchased one of our surface mount Fork Mounts we’ve got you covered, just buy the separate fixing kit when adding the Tray to your basket 😉

If this size is not suitable then let us know what your preferred size is and we will send you a price 😉

*Some photos are representative of the sliding tray construction, the actual size of the tray is stated below.

Sliding Tray Sizes:

  • Max Frame Width 1200mm
  • Frame Depth (including handles) 1540mm
  • Frame Depth (excluding handles) 1500mm
  • Sliding tray Extension 1473mm
  • Internal Base Board Width 1070mm x Depth 1396mm
  • Internal Tray Width 1070mm
  • Tray Depth 1500mm

 

What you get:

  • 1 x Sliding tray W 1200mm x D 1588mm
  • 3 x Removable Sides

*Various vehicle fixing kits available separately, please contact for advise.

Additional information

Weight 500.0 kg
Dimensions 200.0 × 200.0 × 200.0 cm
Brand

Kampa

Reviews

There are no reviews yet.

Be the first to review “Sliding Load Tray/Bike Tray 1200mm Wide x 1500mm Deep suitable for 4 Bikes”

Your email address will not be published. Required fields are marked *

You may also like…