*Designed to work with our Extrusion fitting Fork Mounts.
Its a simple idea….. why have your fork mount permanently fitted when you can take it out when its not needed, saves you tripping over it 😉
We supply a piece of 80mm wide x 16mm high x 800mm long extrusion that has twin t-nut slots and 2 x end caps, we have also predrilled with 4 countersunk fixing holes so you don’t have to.
Once fitted to your vehicle the t-nuts (supplied with the Extrusion fitting Fork Mounts) just slip in from above so you don’t need to worry about bashing the end caps off.
Your Fork Mount/ Mounts can then be dropped on, finger knobs located in the t-nuts and positioned/ re positioned before tightening.
When you need the floor space for something else undo the finger knobs and remove the Fork Mounts leaving the Rail ready for the next ride.
*Don’t worry if you have already purchased one of our surface mount Fork Mounts we’ve got you covered, just buy the separate fixing kit when adding the rail to your basket 😉
What you get:
- 1 x 80mm wide x 16mm High x 800mm Long Extrusion Rail (Pre Drilled 4 x Csk Holes)
- 2 x End Caps