Screw Down - 1200mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
Screw Down - 1200mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
Screw Down - 1200mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
Screw Down - 800mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
Off-Set Mounting Plate for Single and Twin Slot Fork Mount Rails
Screw Down - 1200mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
2 Fork Mounts + 1200mm Rail
3 Fork Mounts + 1200mm Rail
Bike Fork Mount Fits Diameter 15mm Axle x 100mm Fork Width - Compatible with Sliding Tray or Extrusion Rails (RED)
1 Fork Mount + 1 Offset Plate + 1200mm Rail (Ford)
2 Fork Mounts + 2 Offset Plates + 1680mm Rail
3 Fork Mounts + 3 Offset Plates + 1200mm Rail (VW)
Bike Fork Mount Fits Diameter 15mm Axle x 100mm Fork Width - Compatible with Sliding Tray or Extrusion Rails (RED)
Screw Down - 1200mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
Screw Down - 1200mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
3 Fork Mounts + 3 Wheel Holders + 1200mm Rail
Ford Transit Connect (2nd Gen) - 1200mm Fork Mount Rail Twin T-Slot -  Fits Rear Cargo Hoop Mount Holes
Screw Down - 1200mm Fork Mount Rail Twin T-Slot -  4 x Countersunk Holes
3 Fork Mounts + 3 Offset Plates + 3 Wheel Holders + 1200mm Rail (Ford)

Screw Down – 1200mm Fork Mount Rail Twin T-Slot – 4 x Countersunk Holes

£85.00

*Designed to work with our Extrusion fitting Fork Mounts

We supply a piece of 80mm wide x 16mm high x 1200mm long extrusion that has twin t-nut slots and 2 x end caps, we have also predrilled with 4 countersunk fixing holes so you don’t have to.

Quick Details:

  • 1 x 80mm wide x 16mm High x 1200mm Long Extrusion Rail (Pre Drilled 4 x Csk Holes)
  • 2 x End Caps

 

8 in stock

SKU: ER-80-16-1200-SD Category: Tag:

Description

*Designed to work with our Extrusion fitting Fork Mounts.

Its a simple idea….. why have your fork mount permanently fitted when you can take it out when its not needed, saves you tripping over it 😉

We supply a piece of 80mm wide x 16mm high x 1200mm long extrusion that has twin t-nut slots and 2 x end caps, we have also predrilled with 4 countersunk fixing holes so you don’t have to.

Once fitted to your vehicle the t-nuts (supplied with the Extrusion fitting Fork Mounts) just slip in from above so you don’t need to worry about bashing the end caps off.

Your Fork Mount/ Mounts can then be dropped on, finger knobs located in the t-nuts and positioned/ re positioned before tightening.

When you need the floor space for something else undo the finger knobs and remove the Fork Mounts leaving the Rail ready for the next ride.

*Don’t worry if you have already purchased one of our surface mount Fork Mounts we’ve got you covered, just buy the separate fixing kit when adding the rail to your basket 😉

 

What you get:

  • 1 x 80mm wide x 16mm High x 1200mm Long Extrusion Rail (Pre Drilled 4 x Csk Holes)
  • 2 x End Caps

Additional information

Weight 3.25 kg
Dimensions 125 × 12 × 12 cm
Brand

Kampa

Reviews

There are no reviews yet.

Be the first to review “Screw Down – 1200mm Fork Mount Rail Twin T-Slot – 4 x Countersunk Holes”

Your email address will not be published.

You may also like…