So you don’t want to screw in to your vehicle floor or don’t have a vehicle compatible with our other rail options ?
Then this is for you, its a free standing rail, place it anywhere in the vehicle, add a fork mount or two attach your bike and secure the bike frame with the supplied cargo strap.
We supply a piece of 80mm wide x 16mm high x 1200mm long extrusion, the underside of the rail comes supplied with Urethane Rubber Pads so it won’t slide in the vehicle BUT YOU DO NEED to secure the bike to the vehicle interior with the supplied strap.
Fitting 1 – 2 bikes The t-nuts (supplied with the Extrusion fitting Fork Mounts) just slip in from above so you don’t need to worry about bashing the end caps off. Your Fork Mount/ Mounts can then be dropped on, finger knobs located in the t-nuts and positioned straight or straddle both slots to angle the bars for closer nesting, then tighten.
Fitting 3 – 4 bikes Your going to need one of our off-set plates added to each of you fork mounts (these can also be added for 1-2 bikes 😉 These do exactly what it says on the tin, it allows your bikes to be off-set so you can nest them nice and close, There is no right or wrong way to fit them because it all depends on what size your ride is !
*Don’t worry if you have already purchased one of our surface mount Fork Mounts we’ve got you covered, just buy the separate fixing kit when adding the rail to your basket 😉
What you get:
- 1 x 80mm wide x 16mm High x 1200mm Long Twin T-Slot Extrusion Rail
- 2 x End Caps
- 1 x 3 Mtr Cargo strap